Tools used in pc assembly

Pliers Set. A standard set of pliers should include cutters, standard pliers and needle nose pliers. It may also be useful to keep pliers in different sizes on hand to tackle different types of projects. Utility Scissors and Knife. Utility scissors and utility knives are useful and should always be kept on hand. Use utility scissors to open sealed packages and boxes of new equipment.

Use box cutters or utility knives to break seals on packages and to open blister packaging. Jewelry Screwdriver Set. A jewelry screwdriver set is similar to a standard set, but the screwdrivers are much smaller.

These jeweler screwdrivers are intended for use with very small screws and offer more precision than standard screwdrivers. I just use a phillips screwdriver, side cutters for the zip ties and small flashlight. Infected , Jan 10, If you're paranoid, a wrist grounding strap is also good. Or just always be touching bare case metal. Joined: Feb 5, Posts: 4, I didn't I let the person that I purchased the various components from, assemble the hardware.

They must have done a good job, back in , because it is still running. Tarnak , Jan 16, You must log in or sign up to reply here. Show Ignored Content. Your username or email address: Do you already have an account? No, create an account now. Yes, my password is: Forgot your password?

This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn More If you have a fixed work area, you can instead opt for a larger hardware organizer Remove non-product link , which will have multiple small drawers.

Leave one or two compartments free for dumping in screws as you build. If not tightened down sufficiently, motherboard standoffs can come loose as you try to loosen the screws holding the mainboard in place. The screw remains tight within the standoff, however—leaving you in purgatory until you can keep the standoff still as you remove the screw.

In fact, further down this list are tools to help fix that common problem. But if you own a hex nut driver in the right size, you can avoid that time and irritation. Before you mount the motherboard, slip it over the standoffs and ensure each one is firmly attached to the case. No need to overtighten, either; just a bit past when the standoff first hits the metal of the case. Too much and you risk stripping the screw threads on the standoffs.

Think a spinning standoff will never happen to you? Readjustments can come up during building. Also, later maintenance on your system may require it. Believe us, nothing stokes deep rage like when a standoff gets stuck as you try to remove a mobo for an RMA return. Some cases come with an accessory—a small metal piece compatible with a Phillips 2 screwdriver—that fulfills this same role, but not all do. You may also have a bit like this in a screwdriver kit you already own or will be buying look for the M5 size.

If neither apply to you, you can purchase a standalone 5mm hex nut driver Remove non-product link. It will work with the two most common sizes of standoffs, though the smaller size will be a tad loose. You may want to grab these regardless of what you already own, as the larger grip on a standalone hex nut driver makes tightening or loosening the standoff easier. Already have a small adjustable wrench in your toolbox? A good flashlight makes clear where stray screws rolled, the labels on front panel pins, and where that one last screw hole on the mobo is.

A crescent wrench can fill a dual role in your toolbox: Use it to tighten standoffs prior to motherboard installation, or to help with freeing one spinning loose under a mobo.